Aramid Clutch Facing Friction Material

TF2016 is a rigid woven friction material with a medium friction coefficient. TF2016 is a heavy duty material for clutches. Manufactured with draft yarn and aramid fibers, it is recommended for commercial vehicles, especially where thermal conditions are high.

1 (914) 244-3600

Friction Properties

Static Friction Coefficient (15bar, from box): 0.53±0.05 μ
Static Friction Coefficient (15bar, 100oC): 0.55±0.05 μ
Dynamic Friction Coefficient: 0.50±0.05 μ
Wear Rate [mm3/kWh]: 30 (at 150oC/302oF)
T Fading: >350oC/662oF

Physical Properties

Hardness (DIN53505): 80±5 ShoreD
Specific Gravity (ASTM D792): 1.7±0.05 gr/cm3
Ignition Loss (ASTM D-2524): 50±2 %
Compressive Strength (ISO 844:2014): 120±10 N/mm2
Burst Resistant (200 x 137 x 3.5) 200°C: 12000±100 RPM

Thermal Properties

Maximum Intermittent Operating Temp: 1220/482 ᵒF/ᵒC
Maximum Continuous Operating Temp: 400/662 ᵒF/ᵒC

Material Type: Kevlar Clutch Friction

Appearance /Formats:

Rings, Gears, Clutches
Blocks, Bonded Parts
Sheets

Applications

Heavy Duty Automotive Clutches
Heavy Truck Clutches
Many Types of Industrial Clutches

Compliance: Reach (EC) 1907/2023 & RoHS2015/863/EU

Additional

Recommended Mating Surfaces: Pearlitic Cast Iron with Hardness HB150-200.
Recommended Adhesive: Thermosetting.
Oil Resistant: Yes.
The above data is taken from specific test parameters, therefore results can vary in differing application conditions:

TF2016 Aramid Clutch Facing Material