TF202 Molded Friction Material

Home » Injection Molded » TF202 Molded Friction Material
Precision-molded friction material, composed of elastomers, synthetic resins, friction fibers and minerals with the necessary vulcanizing agents.
TF1600

1 (914) 244-3600

Friction Properties

  • Friction Coefficient: 0.451±0.05μ
  • Working Pressure: 150 PSI
  • Wear Rate : 0.0055 in3/hp

Physical Properties

  • Hardness (DIN53505): 80±7 Shore C
  • Specific Gravity (ASTM D792): g/cm3
  • Solvents Extraction: 6% maximum
  • Tensile Strength (ASTM D638): 2.6

Thermal Properties

  • Maximum Continuous Operating Temp: 150/302 Cᵒ/Fᵒ
  • Maximum Intermittent Operating Temp: 200/392 Cᵒ/Fᵒ

Material Type: Molded Friction

Appearance /Formats:

Sheets
Rings
Bonded Parts

Applications

Industrial Brakes
Friction Pads for Appliances
Clutches & Oil-Dipped Clutches
Robotics Brakes, Clutches
Controlled Slip Applications

Compliance: Reach (EC) 1907/2023 & RoHS2015/863/EU

Additional

Recommended Mating Surfaces: Pearlitic Cast Iron with Hardness HB150-200.
Recommended Adhesive: Thermosetting.
Oil Resistant: Yes.
The above data is taken from specific test parameters, therefore results can vary in differing application conditions: