Thermofiber 1200

Home » Industrial Parts » Thermofiber 1200

TF1200

TF1200 is a ProTec Friction standard formulation which is suitable for light medium duty. It is a rigid material, with low wear and very stable friction performance. The material’s main composition consists of phenol resins with a NBR bonding system, short fibers, friction modifiers and fillers.

TF1200 is fully cured and suitable for bonding and riveting.

TYPICAL APPLICATIONS Agricultural and Building Machinery, Calipers for Industrial Applications, Coned Segments for Machinery, Friction Washers, Gear Discs for Industrial Devices, Industrial Clutches, Rings Segments for Machinery

AVAILABLE FORMS Disc Brake Pads, Gear Tooth Facings, Flat Sheets, Special Molded Pieces

TF1200 Technical Data

FRICTION PROPERTIES

Static Friction Coefficient (15bar, from box): 0.45 ± 0.05 μ
Static Friction Coefficient (15bar, 100oC): 0.50 ± 0.05 μ
Dynamic Friction Coefficient (10bar, 10m/s): 0.40 ± 0.05 μ
Wear Rate (10bar, 15m/s): 120 ± 10 mm3/Kwh
Temperature Fading (10bar, 10m/s): >662°F

PHYSICAL PROPERTIES

Hardness (DIN53505): 85±5 Shore-D
Specific Gravity (ASTM D792-91): 1.8±0.05 gr/cm3
Thermal Conductivity (ASTM E1952-01): 0.44±0.01 W/m°K
Shear resistance (ISO 6312:2001): 22±2 N/mm2

MECHANICAL PROPERTIES

Tensile Strength (ASTM D638-10): 14 ± 5 N/mm2
Compressive Strength (UNE 53205): 140 ± 5 N/mm2
Poisson Coefficient: 0.27 ± 0.03
Young Modulus (ASTMD 638-10): 3896 ± 100 N/mm2

RECOMMENDED WORKING VALUES

T° Max. Continuous Operation: 482 °F
T° Max. Intermittent Operation: 662 °F

The above test data is provided for informational purposes and represents standards in controlled laboratory settings. Actual performance will vary by application and operating conditions.