Thermotech 125

Industrial Parts  /  TTP125 Cellulose Friction Paper

TTP125 is a non-asbestos cellulose fibre friction material reinforced with a high volume of graphite. This is a high strength material providing a very stable coefficient of friction and good thermal conductivity.

  • High heat stability
  • Smooth engagement characteristics
  • Excellent energy capability
  • Good wear resistance

TYPICAL APPLICATIONS Powershift Transmissions, Power Take-Off Clutches, Forward-Reverse Clutches

MATING MATERIAL Steel, Cast Steel, Grey Cast Iron
Surface Finish < 0.5μm Ra (20μ")

Friction Material Data

Static 0.12 - 0.16
Dynamic 0.11 - 0.14

Max Dynamic Pressure 3.5 N/mm2 (464 lbf/in2)
Max Rubbing Speed 45 m/s (130 ft/sec)
Max Specific Power 4.0 W/mm2 (3.4 HP/in2)


  • Grooves can either be pressed or machined
  • Radial, Waffle, Spiral, and Sunburst

Friction Thickness
0.50mm (0.02") ~ 1.20mm (0.05")
Friction Diameter 1,000 mm (39") max / 50 mm (2") min


The above test data is provided for informational purposes and represents standards in controlled laboratory settings. Actual performance will vary by application and operating conditions.