Thermofiber 4800

Industrial Parts  /  TF4800

Thermofiber 4800 is a rigid molded friction material, whose main characteristic is a very low dynamic friction coefficient. It is composed basically of resins as a link system with frictional modifier agents, This material has good mechanical properties. It is a fully cured material and is suitable for both bonding and riveting.

TYPICAL APPLICATIONS Industrial Clutches, Continuous Brakes, Calipers for Industrial Applications

AVAILABLE FORMS Flat Sheets, Finished Parts

 
 

TF4800 Technical Data

COEFFICIENT OF FRICTION (μ)
Dynamic 0.18

WEAR RATE 22± 10 mm3/Kwh

TEMP FADING 392 F

HARDNESS 74±5 Shore-D

SPECIFIC GRAVITY 1.89± 0.05 gr/cm3

MEaCHANICAL RESISTANCE
Tensile Strength 37N/mm2
Compressive Strength 130N/mm2
Poisson Coefficient 0.24

T MAX. CONTINUOUS OPERATION 302 F

T MAX. INTERMITTENT OPERATION 392 F

 

The above test data is provided for informational purposes and represents standards in controlled laboratory settings. Actual performance will vary by application and operating conditions.