Thermofiber 202N
Molded friction material, composed of rubber, synthetic resins, friction fibers and mineral fillers, with the necessary vulcanised agents.
It does not contain asbestos or cadmium.
TYPICAL APPLICATIONS Industrial Brakes, Friction Pads for Appliances, Clutches and Oil-Dipped Clutches, Brakes and Clutches for Electric Engines.
AVAILABLE FORMS Integral Molded, Mixed Molded, Friction Bands
TF202N Technical Data
COLOR Tan
SURFACE QUALITY Peened
COEFFICIENT OF FRICTION (μ)
Maximum 0.48
Medium 0.40
Minimum 0.32
HARDNESS 80 ± 7 (Shore- D)
SPECIFIC GRAVITY 1.90 ± 0.10
VOLATILE > 0 y < 3% in weight
SOLVENTS EXTRACTION 6% maximum
MAX. WORKING PRESSURE 10 Kg. / cm²
MAX. WORKING TEMPERATURE
Intermittent Working 200ºC
Continuous Working 150ºC
The above test data is provided for informational purposes and represents standards in controlled laboratory settings. Actual performance will vary by application and operating conditions.